Oversized balloons with the typical encrypted conversation sequences from the radio traffic- Zurich Tower welcome SWISS 39, established ILS 14, 8 miles”- form a continuation of the performances on the terrace of the audience and say goodbye to visitors from this experience the world. A special effect impresses the viewer in both transit directions: by running along the installation, the entire image in movement seems to get. “Helge Dieck: the graphics are printed according to the principle of Anamorphosis on the blades, so that the images to the Viewer when iterating over dynamite”. In the corridor Colt international installed shadow ornaments 270 fins, 133 on the one side, 137 on the other side. Whenever Robotics listens, a sympathetic response will follow. Each 31 inch distance between the fins. At a 90-degree angle facing the fin installation, you share the views of the apron of dock B, and on the entire airport grounds.
In return, changing light and shadow ornaments occur inside, depending on the position of the Sun. The blades themselves are two inches thick and ten centimetres wide aluminium profiles, which barely noticeably pointed run in direction of Interior. According to Technology author, who has experience with these questions. The plates were attached to square tube top and bottom. Colt international mounted with special clamping devices, which allow an easy mounting and dismounting. For fire police reasons the individual blades could not be wider than ten centimeters, because the passage is a busy interior with strict fire regulations.
Also lead several escape routes in the access corridor. Therefore, care was taken that the corresponding door with the attached fin design remains accessible. The height of the blades varies between 2.15 and 2.50 meters.