The "Stalinist" houses and the old foundation walls of the inner often a plank wall. In modern building interior walls made of gypsum concrete generally, foam, etc. giprokartona Partitions of the above materials have very little bearing capacity and durability. It is recommended before final selection of "To tap" the wall. If the wall is concrete or brick, even if it is thin (for it is ventshahta) can safely hang up on her water heater to 100 liters in volume. Water heaters up to 200 liters are advised to hang up only on the load-bearing walls. If the walls have a low carrying capacity, then we recommend installing heaters on them no more than 50 liters, or make them a special metal frame.
I would like to add that most amount purchased – it is 50 liters. 2. Selection: Choosing a stainless steel or enamel water heater, you will inevitably face a dilemma: water heater tank with an internal stainless steel or enameled with a tank. Enamelled tanks are cheaper, but the Russian people by ear certainly nicer word "stainless steel". "Corrosion" in our mind represents something sturdy, perpetual, well made. Conventional wisdom is that "stainless steel" is expensive enameled tank at 30 – 100%, but is several times longer, and with it you get trouble with frequent replacement of the magnesium anode, in other words in the Russian context, where the low quality of cold water, the optimum use water heaters, stainless steel. 3. Size, shape currently range of water heaters is very wide.